loader
CarteRaspberryPiPicoW(WiFi)_front.jpg
CarteRaspberryPiPicoW(WiFi)_back.jpg
CarteRaspberryPiPicoW(WiFi)_front.jpg
CarteRaspberryPiPicoW(WiFi)_back.jpg

Raspberry Pi Pico W (WiFi) card


Référence : PICOPIWH
Compatibilité
Arduino
Micro:bit
Raspberry Pi
STM32

8.9€ excl. taxes 10.68€ incl. taxes

Raspberry Pi Pico W: the compact and powerful WiFi microcontroller board for your connected projects. Read more

These products can interest you too

Description

Raspberry Pi Pico W: the compact and powerful WiFi microcontroller board for your connected projects.

Features:

The Raspberry Pi Pico W is a miniature programmable board equipped with a WiFi interface, built around the RP2040 microcontroller.

Ideal for low-power connected projects, it combines the flexibility and power of an ARM Cortex-M0+ Dual Core processor clocked at 133 MHz, with the ease of use of an Arduino® board.

Whether you are a beginner or an advanced user, the Pico W allows you to carry out your projects in MicroPython, C/C++, or Python, thanks to detailed documentation and accessible development tools.

With its ability to emulate USB HID devices like a keyboard or mouse, the Pico W opens up a wide range of creative applications.

It is perfect for small projects that require WiFi connectivity while maintaining a very competitive cost.

You can program the Raspberry Pi Pico W (WiFi) on the dedicated Vittascience interface.

Technical Specifications:

  • Power Supply: 5 VDC via micro USB (cable not included) 5 VDC via the VBUS pin
  • Microcontroller: RP2040
  • Processor: ARM Cortex-M0+ Dual Core at 133 MHz
  • SRAM: 264 KB
  • Flash Memory: 2 MB
  • WiFi Interface: Chip: Infineon CYW43439 Frequency: 2.4 GHz 802.11n Integrated antenna Compatible with WPA3 and SoftAP (up to 4 clients) Interface: SPI
  • Connectivity: 26 GPIO pins including: 23 x digital I/O 3 x analog inputs (12-bit ADC) 2 x UART interfaces 2 x I2C buses 16 x PWM outputs 8 x PIO (Programmable I/O) pins 1 x SWD debug interface USB 1.1 host and device interface via micro-USB port
  • Programmable LED on GP25
  • Operating temperature: -20 to 85 °C
  • Dimensions: 51 x 21 x 3.9 mm
  • Weight: 3 g

Logic inputs are only compatible with 3.3 VDC (higher voltage would damage the board).

This board does not have HDMI, CSI, DSI connectors, and does not run a Linux OS. It is designed as a microcontroller, similar to Arduino® or micro:bit® boards.